TCP Multipurpose Polyurethane Foam is used to insulating and filling of larger seams, joints, cracks such as gaps between walls, windows and doors. Suitable for gap filling, gap separation, cracks and breaking holds sealing.
Application Instructions
As using the gun type, make sure you clean the gun with TCP Foam Cleaner after you are done. Dried foam cannot be cleaned with any solvent. It can only cleaned mechanically.
Surface Preparation: Use area be clean and free of dust and fragmented fine particles. Dampened surfaces increase curing rate and allow to use less foam.
Shelf Life and Storage Conditions: If stored in its original and undamaged package, in dry contrition, protected from direct sunlight in temperatures from +5OC to +25OC, it is suitable for use 18 months as from direct sunlight in temperatures.
Warnings: Read the the instructions carefully. Do not apply pressure to the can, store above 5OC. Clean unwanted particles with TCP Foam Cleaner. As using the gun type, make sure you clean the gun with TCP Foam Cleaner after you are done. Dried foam cannot be cleaned with any solvent. It can only be clean mechanically.
Hazardous Components: Isocyanate acid, polyethylene ester. Extremely flammable aerosol.
May burst if heated. Cause skin irritation. May cause an allergic skin reaction. Causes serious eye irritation. Harmful if inhaled. May cause allergy or asthma symptoms or breathing difficulties if inhaled. May cause respiratory irritation. Suspected of causing cancer. May cause damage to organs through prolonged or repeated exposure. Keep out of reach of children keep away from heat, hot surfaces, sparks, open flames and other ignition sources.
No smoking, do not spray on an open flame or other ignition source. Do not pierce or burn, even after use. Wear eye protection, face face protection protective clothing, protective gloves. In case of inadequate ventilation, wear respiratory protection. If on skin, wash it with plenty water.
IF IN EYES, rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rising. If experiencing respiratory symptoms, call a doctor, a poison center protect from sunlight. Do not expose to temperatures exceeding 50OC/122 OF. Dispose of contents/container to hazardous or special waste collection point, in accordance with local, regional, and/or international regulation to avoid breathing gas, spray, vapors.
Person already sensitized to polyisocyanates may develop allergic reactions when using this product. Persons suffering from asthma, eczema or skin problems should avoid contact, including dermal contact, with this product. This product should not be use under conditions of poor ventilation unless a protective mask with an appropriate gas filter i.e. type A1 according to standard EN 14387 is used