Shield Waterproofer is an acrylic-based waterproofer that seals and protects surfaces against damaging effects of rain and water. Due to the fact that Shield Waterproofer has a high percentage of acrylic binder, a resistant, flexible layer forms on the cement/plaster surface. The formed layer helps protect against water penetration but also prevents the forming of cracks due to expansion and contraction of cement or plaster surfaces.
3.6 Litres, 10 Litres, 20 Litres
Before applying Shield Waterproofer, proper surface preparation is crucial. Remove dust, loose particles, and fatty stains. Then, apply a suitable primer (Shield Stabilizer) to ensure wall is neutralized, before applying Shield Waterproofer. Three coats of Shield Waterproofer must be applied at three different stages after surface preparation.
First Coat: Shield Waterproofer should be diluted with 50% water and applied with a brush or a roller.
Second Coat: Shield Waterproofer should be diluted with 30% water and applied with a brush or a roller.
Third Coat: Shield Waterproofer should be applied directly form it’s container without dilution.
Shield Waterproofer is a ready to use product and needs no dilution. It can be applied using a roller, trowel or scraper.
FEATURES & BENEFITS
Shield Waterproofer has been specifically designed to withstand the expansion and contraction of masonry surfaces due to water penetration. Therefore, it prevents the forming of cracks and thus reduces maintenance costs by improving and extending the useful life of cement and plaster
Appearance Milky White
Coverage 10-12/ m2
Dilution No dilution needed
Drying Time 2 hours
STORAGE & PACKAGING
Shield Texture should be stored at a temperature below 40º C.
Shield Texture containers should not be exposed to direct sunlight.
Shield Texture is available in 11.25L and 20L plastic containers.